AM CUTTER C165:
- Operates in 8 to10 inch pipes and with additional extensions in pipes up to 22 inches.
- All stainless steel construction
- 3 separate movements simultaneously perform:
- 420 degree rotation
- 6 inches forward/backward
- 6 inches up/down
- Compatible to all TV-equipment
- Working range up to 780 feet
- 2.0 HP pneumatic motor w. 7,500 RPM
- Pneumatic lock function
- Back part articulates for easy installation in narrow manholes
- Cutting heads available for:
- Steel
- Concrete and Vitrified clay grinding
- CIPP Liners
- PVC Liners
- HDPE Liners
AM - CUTTER B112:
- Operates in 6 and 8 inch pipes.
- All stainless steel construction
- Three separate movements simultaneously perform:
- 420 degree rotation
- 6 inches forward/backward
- 4 inches up/down
- compatible to all TV-equipment
- Working range up to 780 feet
- 1.0 HP pneumatic motor with 11,000 RPM
- Pneumatic lock function
- Back part articulates for easy installation in narrow manholes
- Cutting heads available as for C165 cutter
AM CONTROLLER:
- Operates all AM - cutters and hose reels.
- Three separate joysticks for the three movements
- Fully fused for protection of crew and equipment
- Only low voltage for work in a wet environment.
- Volt meter for primary supply
- Volt and Amp meter for secondary circuit
- Potentiometer for movement speed control
- Switches for: Main power, Start cutting head, Lock function, Hose reel clutch and Hose reel movements.
AM - HOSE REEL UNIT:
- Up to 780 feet of 1 1/4” (32mm) air hose with internal control cable.
- Pneumatic clutch and reel drive pulls up to 650 lbs.
- Air and electric connectors for AM - cutter and AM - controller
- Air swivel and electric slip ring system
- Air hose acts as pulling cable for return of cutter.
- Dual controls from either the AM - controller or hand held controller by the reel.
- Electric hoist for installation and retrieving of cutter.
- Floodlight mounted on hoist arm for additional light in manhole.
- Separate reels with up to 850 feet of above ground cable as connection between hose reel and TV-equipment.
- Dimensions are H 59”, L 59”, W 37”
- Weight approx. 1200 lbs.
MINI HOSE REEL UNIT:
- Up to 390 feet of 1” (25mm) air hose with internal control cable.
- Reel hand operated
- Air swivel and electric slip ring system
- Air and electric connectors for AM - cutter and AM - controller.
- Air hose acts as pulling cable for the return of the cutter
- Separate reel with 400 feet of above ground cable connects hose reel and TV-equipment
- Dimensions are H 35”, L 34”, W 31”
- Weight is approx. 300 lbs.
TEST CABLE:
Connects the AM - cutter directly to the AM - controller.
It is used as a bypass of hose reel and above ground cable during equipment check and maintenance.
TRAILERS:
Trailers for southern states are normally built half-enclosed, with the hose reel inside, and the compressor outside. For use in northern states the trailer is fully enclosed.
Southern trailers:
- 8x14 feet trailer 10,000 GVWR tandem axle with electric brakes. The back 8 feet is enclosed, double rear doors swing open.
- Interior light is 12V
- 100 CFM Compressor 125 PSI, built in fuel tank, mounted on open section.
- ABC35P air cooler, air driven 122 CFM
- Inline automatic water trap
- AM - hose reel is mounted in enclosed section
- Rack for cutter storage
Northern trailers:
- 8x14x6.5 feet fully enclosed trailer 7,000 GVWR dual axles, electric brakes, dual back doors swing open, curb side, side door
- Interior 12V light.
- 100 CFM utility compressor w. separate fuel tank.
- ABC35P air cooler, air driven 122 CFM.
- Inline automatic water trap.
- AM - hose reel unit mounted towards the back.
- Rack for cutter storage
|