| AMerik Engineering, LLC | 2600 Ainsley Ct. Marietta, GA 30066 770-924-2899 |
| SAERTEX multiCom Fiberglass Liner |
| Corrosion Resistant Fiberglass |
  From the manufacturing line at SAERTEX®  SAERTEX® multiCom |
Saertex®-Liner is a 100% fiberglass liner designed for gravity pipe systems. The “sandwich” construction and unmatched strength proves itself to be a turn of the century product and not just a copycat, offering 20 year old technology.
Today, over 1,000,000 feet have been installed worldwide since its 1992 introduction in Europe. The sizes range from 6 to 46 inches and with wall thickness' from 4.0 to 15 mm.
The liner is factory impregnated and manufactured under ISO 9001 quality control with long-term testing for creep modulus, strain corrosion, water absorption, abrasion resistance. (in addition to other criteria).
The corrosion resistant material is a Owens Corning®, Advantex® product with at least two separate layers and off set seams to ensure uniform ring stiffness. Internally a thin polyester veil acts like a gel-coat layer, when impregnated, to create an extremely smooth surface with high abrasion resistance. When Steam curing is selected, it is the only CIPP product with a second curing step at 230 degrees. This additional step allows the resin to develop to its full strength and corrosion resistance capacity. UV-light curing provides the smallest shrink factor in the industry which virtually eliminates water migration between the liner and the existing pipe.
The results is a strong and desirable 70 years expected life. Produced and installed according to ASTM 2019 Design according to ASTM 1216 X1. Installation time— 4-5 hours |